Hoses and Attachments
Home / Products / Shipboard Equipment / Supply/ Hoses and Attachments
NAVY – Saddle, Hose – Re-Supply at Sea (RAS)
Marine grade aluminium casting.
Type “A” - Broad web x 3 attachment holes on top & 1 base hole.
Type “B” – Broader web x 3 attachment holes top & bottom.
Connections: Split male and female clamp fitting either end.
Used for joining two sections of fueling hose.
NAVSEA references: 810-1385957 & 805-4472629 & 803-2260818.
NATO codified 7” & 4” & 2 1/2 “ configurations.
Fuel Hose - Navy
Hose assembly, non-metallic, 1” ID.
Comes with camlock, dust cover, nozzle aviation and clamps.
Length: 10 meters.
Use: fuel, oil – aviation
Configuration: male/female, camlock, flanged.
Hose tested and certified tagged.
Military specification: MIL-H-370.
Military Hose Assemblies
Hydraulic, RAS, Fuel, pneumatic and fire.
Manufactured, assembled and tested to military standard.
Conforms to RAN, USN and DIN specifications.
Military specifications: MIL-H-8794, MIL-DTL-8794 and MIL-PRF-370.
Pressure testing to 10,000psi.
Tagging and certification
Hydraulic Hose Cradle
To fit hydraulic hose storage and transport box.
Allows correct hose sequence fit up.
First off hose to last off hose in order.
Allows various sizes, configurations and lengths.
Thermo plastic to prevent scuffing.
Modular in design for ease of layer removal.
Made to order as per requirements
Manufactured to Navsea Dwg No. 803-2145518-2.
Solas Regulation 15.2.11 requires fuel lines to be protected to prevent hazardous oil spray and oil leaks.
Multi layered, fibre glass construction, aluminium inner layer (re-usable).
Steel cable ties threaded through loops to ensure secure holding.
Maximum temperature: 275ºC, maximum pressure: 1650psi.
Recommended for use on HP and LP fuel and lube lines, flanges, couplings and valve joints.
Sizes from 50mm to 300mm wide and from 6m to 9m in length in roll form
Nozzle Repair Kit - Aluminium
Navy Washdown Countermeasure Nozzles
Type SB Flush Deck Nozzle (Stainless Steel or Aluminium)
Spare Parts Kit Consists of ;
Truss Head Machine Screw
Fender Washer / Heli Coil Insert
Web-Sub Assembly (Stainless Steel or Aluminium)
Ball Stainless Steel
Nozzle, Jet Ejector - Part No BDI 11423
Anzac Class Frigate liquid jet ejector nozzle.
Motive nozzles to suit ejector type 18-6.
Motive nozzles to suit ejector type 17-6.
Manufactured tolerances to DIN / ISO 2786C.
Used for pumping out bilges, chain lockers and ballast tanks.
Materials: bronze, copper nickel, titanium and stainless steel.
No moving parts are used in jet ejectors – only replaceable nozzles
Block Out Device, Carter, Closed Circuit Nozzle
Special tool for use in Model No. 64348.
Recommended for use when defueling through Hose End Control Valve (HECV).
Used to check secondary pressure control device in system.
Prevents dangerous spray during operation.
Used on most Carter brand hose end control valves.
Ex stock Australia.
SERVICES & CAPABILITIES
If you would like more details on a particular product or service please fill out and submit the form below and one of our team will contact you with more information.